Pile / fluff threads are inevitable for sewing. The more you use the sewing machine, the more pile / feather / mohair will accumulate in the machine and the area you are sewing. Keeping the sewing machine clean and periodic flat sewing machine cleaning not only helps your machine run better, but also prevents your machine from causing a bigger problem.
How long does it take to clean the sewing machine?
This depends entirely on how often you use the machine.
If you use your machine every day, once a week,
If you use it once or twice a week, once a month,
If you use it several times a month, it is necessary to do the cleaning and lubrication every three months or take a look at the bobbin section, if the hair has started to accumulate, you can clean it.
Usually there are three things to check if there is a problem with the machine;
1. Reinsert the needle or bobbin,
2. Attach a new needle suitable for the fabric you sew,
3. Clean Overlock Machine.
General problems in Overlock Sewing machine are caused by dust, fiber, fluff, yarn part accumulating in machine parts.
If the overlock machine causes problems even though you clean it, contact the service. Do not continue sewing. This can cause larger problems on your machine.
Requirements for Straight Sewing Machine Cleaning;
User guide. Straight stitch machine's user manual is the best reference point. If you have lost the guide, you can find it by searching the brand / model on the internet. If you can not find it also on the Internet.
Consult the service by specifying the sewing machine model and serial number.
Mohair brush. Most sewing machines have this brush.
Needles:
Also check that you have enough needles. Take the needles in stock if possible because you need to change your needle in every new project or maintenance.
A soft cloth.
Small blowing apparatus.
You can also clean and use mascara / mascara brushes that you will not use.
You can also clean it with ear bars.
Never use a wet or soapy cloth on the internal parts of the machine.
Where to Start Machine Cleaning First:
First unplug your machine. Lift the presser foot, make sure the needle is up. Remove the presser foot. Remove the needle and discard it. Remove the needle tray.
Cleaning the Feeding Area;
Remove hairs from the feeding area with a brush. After removing all the visible hairs, blow out the air with the vacuum apparatus.
Replace the needle tray. Attach a new needle and presser foot.
Bobbin Slot Cleaning;
Remove the bobbin bobbin. Remove the bobbin case. Remove the shuttle after removing the round metal part in front of the shuttle. Remove all of them with a dry cloth. Add a little oil to the shuttle seat / tighten.
Bobbin Shuttle Cleaning;
Open the machine's side cover. Remove all the hair you see with the brush. Blow air from top to bottom with the vacuum apparatus.
Sewing Machine Internal Cleaning;
Follow the moving parts inside the machine with the help of the flywheel. Only apply a small amount of oil to the moving areas. Replace the cover. Clean the entire outer surface of the Sewing Machine with a dry cloth.